Fritzing does not install on Ubuntu 26.04
On my system is Fritzing 1.0.7 running. After download the version 1.0.8 it runs 1x and disappear after restart the laptop. Is there someone who can give me the good tip. After editting...
View ArticleVersion 1.0.8 for Mac attached file is wrong
The attachment in the Mac OS version does not have an attachment. DMG 7 posts - 4 participants Read full topic
View ArticleCannot upload file to gerber
Steps I took that resulted in the problem: Created a PCB in Fritzing … What I expected should have happened instead: Expected this file to upload to a folder after Gerber was called … My version of...
View ArticleMPU9250 does not detect magnetometer
I recently bought an MPU9250 sensor, but I’m facing an issue where the magnetometer is not working. The accelerometer and gyroscope are working fine, but I’m unable to get any data from the...
View ArticleDRC at 1.0.7 isn't as fast as on 1.0.6
Steps I took that resulted in the problem: start DRC on a PCB (format is near DIN A4). It runs about 5 minutes. Tested an 2 different computers. Using 1.0.6, the DRC needs about 40 secounds. The same...
View Article1.0.7 lässt sich nicht installieren
Steps I took that resulted in the problem: Installation steht bei Auswahl Einzelner Nutzer / Alle Nutzer… What I expected should have happened instead: Fortsetzung der Installation My version of...
View ArticleCan't import .fzpz part files - V 1.0.6, MacOS 15.7.5
Steps I took that resulted in the problem: Tried to upload a variety of different .fzpz parts files. Instead of loading it, I got the error message as follows: Unable to open sharable part [path to...
View ArticleMissing adjustment to newly loaded board SVG
Steps I took that resulted in the problem: I created a custom board outline and loaded this board as SVG As a result I could not work with the board until I saved and reloaded the project as the board...
View ArticleClik here to view.
No Menu Bar visible
Steps I took that resulted in the problem: normal use of fritzing: no menu bar visible, was never visible, even after new installation, no right-click options to add a menu bar, maybe have to try 0.9...
View ArticleFeature Request: Silkscreen Labels
Steps I took that resulted in the problem: Placed parts on the board and changed the name. … What I expected should have happened instead: The Label that is created should be close to the part, but it...
View ArticleClik here to view.
Malformed contour.gm1 file with custom PCB shape
TL;DR 1.05 and 1.06 create duplicate %ADD10C entries in contour.gm1 making it malformed so it doesn’t work with JLCPCB online viewer. Steps I took that resulted in the problem: Created a new PCB...
View ArticleClik here to view.
1.0.6 issue on Macos 26.2 Arm
Steps I took that resulted in the problem: i’ve installed v1.0.6 on Macos 26.2 Arm, app start but is unable to close i need to kill it to close … What I expected should have happened instead:...
View Article1.0.6 - Issues with traces being treated as one
Steps I took that resulted in the problem: connect a trace from one resistor to an other component, connect a trace from another resistor to the first attempt to take trace one to the back both traces...
View ArticleClik here to view.
Cannot read the file% 1:2%
Steps I took that resulted in the problem: I tried to import a .fzpz file (Relay module and MAX31865) downloaded from the Github and internet. I moved the file to the D:/ to avoid file path issues...
View Article1.0.6 issues with printing and file corruption
PCB view BLANK after closing fritzing (1.0.6) and re-opening. I had edited and tried to print. Steps I took that resulted in the problem: Edit file. (created in 1.0.4). Attempt to print. Fails. Output...
View ArticleClik here to view.
Sparkfun DIN-5 Sockets - Wrong Pin Numbering
I just had a PCB made up using a DIN-5 socket for MIDI Input and annoyingly the pin configuration on Fritzing is wrong for this part - Pins 4 & 5 are back to front. I’m using the part labelled...
View ArticleClik here to view.
PDB labels suddenly grey and not selectable
This (and related) issues have been mentioned before, but as I am on a complex project, the multiple unexpected changes are frustrating. Examples are the PCB randomly reverting from 2-sided to...
View ArticleClik here to view.
I am unable to execute a ground fill or copper fill at all
Steps I took that resulted in the problem: While working on a large PCB, I wanted to put a ground plane at the end. I’ve never done this before, but it seemed simple enough. However, when I set the...
View ArticleClik here to view.
Fritzing on Apple Silicon (macOS Sequoia)
Fritzing runs fine on macOS Sequoia, Apple Silicon or Intel. Fritzing 1.0.5 still needs Rosetta 2 to run on Apple SIlicon (M1… M4). Recent versions of macOS do not have Rosetta installed by default...
View ArticleCan't draw connections in schematic view on Windows 10 with v 1.05
Hi, I just downloaded the latest version 1.05 and installed it on my Widows 10 PRO pc and everything appeared to go fine. However when I try to connect components in Schematic view no line is drawn -...
View Article
